RKS2137
55cm fibreglass blades RRP £31.25
RKS2138
60cm fibreglass blades RRP £33.65
pale grey with black plastic tip
RKS2347
60cm fibreglass blades RRP £52.35
3D, high quality, white
RKS2137RKS610
Header Tank, Rectangular, with holder RRP £13.15
RKS397 Tank
only, RRP £7.90
RKS625 Holder only, RRP £5.25
Header Tank, Round, RRP £10.50
RKS419.2
T type filter, RRP £2.30
.
Retainer for T type filter (2), RRP £5.75
RKS805
Exhaust deflector 65 deg., black, RRP £3.30
RKS804
Exhaust deflector 35 deg., black, RRP £3.30
RKS730
Exhaust deflector 45 deg., clear, RRP £5.20
Picture shows 35 degrees
Fuel clamps (2), black RRP £1.95
RKS975C
Fuel clamps (2), bright colours
RRP £1.95
Exhaust cap 6 - 7mm dia. RRP £3.40
RKS619
Exhaust cap 8 - 9mm dia. RRP £3.40
RKS620
Exhaust cap 10 - 12mm dia. RRP £3.40
These come complete with slip ring
Fuel line set, RRP £3.30
Tube cap (2), RRP £3.25
RKS738
Tube cut-off and cap (2), RRP £4.10
RKS621
Tube cap, plastic (3) RRP £2.55
RKS1375
Tube cap, metal, RRP £4.25
Two large, two small
Hook for hand fuel pump RRP £4.50
Battery holder, RRP £9.55
RKS533
Tail control guide set, RRP £4.45
RKS845
Universal tail control rod guide , RRP £7.25
RKS534
Tail control guide set (for carbon tube) , RRP £3.20
With two rather than four supports
RKS535
Tail Support Bridge , RRP £5.80
RKS517
Carbon tail support set, 30-60, RRP £26.45
RKS770
Direct tail servo mount (Universal), RRP £12.75
.
RKS576
Antenna holder, RRP £5.45
RKS2123
Antenna tip holder, RRP £3.55
RKS181
Joint ball set, RRP £6.15
85mm 30 size Tail
Rotor Blades, RRP £2.35
RKS727 Orange
RKS727.1 Yellow
RKS727.3 Purple
RKS727.4 White
RKS727.5 White translucent
95mm 60 size Tail rotor Blades, RRP £5.10
RKS726.0 White
RKS726.1 Yellow
RKS812 Translucent white, 105mm, RRP £5.10
RKS328.1 Yellow
RKS337 60 Size Paddles, Grey, RRP £10.35
Small
skid stops, pack of 4,
RRP £7.65
RKS509 orange
RKS510 yellow
RKS740 clear
RKS766 glo-in-the-dark
RKS466 white
RKS467 black
RKS511 pink
RKS2448 blue
Large
skid stops, pack of 4,
RRP £7.65
RKS513 orange
RKS514 yellow
RKS741 clear
RKS515 pink
RKS516 green
RKS468 white
RKS469
black
RKS2449 blue
Lightweight hex allen drivers, RRP £6.30
RKS1636 1.5mm
RKS1637 2.0mm
RKS1638 2.5mm
RKS1639 3.0mm
Spare
tips,
long
RRP £2.75
RKS1672 1.5mm
RRP
£2.05
RKS1673 2mm
RKS1674 2.5mm
RKS1675 3mm
Taper
head hex wrenchs RRP £5.60
RKS717 1.5mm
RKS718 2.0mm
RKS719 2.5mm
RKS720 3.0mm
For more hex drivers, see our Far Eastern tools page
RKS624
Paddle Gauge, RRP £6.35
.
.
.
RKSP001
Spring-loaded pitch Gauge, RRP £9.95
RKS623
Pitch gauge plate for use with paddle gauge,
RRP £8.65
Blade balancer,
RRP £30.25
RKS737
Ball Link Wrench (x2),
RRP £3.40
RKS673
Ball link pliers, plastic
RRP £7.70
RKS508
Flybar setting weights, 3mm, RRP £11.55
For 30/50 size.
RKS1168
Flybar setting weights, 4mm, RRP £15.25
For 60/90 size.
.
RKS239
RKS095
One-way hex starter shaft RRP £30.25
RKS239
Hex Starter Shaft,
RRP £36.25
With one way bearing
RKS239.1
Replacement one-way bearing RRP £20.00
RKS239.2
Replacement hex shaft joint RRP £10.20
RKS258
Replacement plastic spacer RRP £2.05
RKS732
Starter cup assembly, RRP £27.50
Only usable with K&S hex starter shaft, RKS239
RKS2122
MG Hex starter shaft RRP £57.75
Top of the range, one-way bearing
Heavy duty Starter, RRP £64.95
RKS859
Blade sleeve (Universal), RRP £12.75
See also our Hobby Taiwan blade caddy
Heli position visual aid. RRP £7.50
A little heli to help visualize what your model should look like at different angles in different manouvres.
Heli transport holder (set of 2), RRP £7.70
Clip on to your skids and can be screwed to a board or to the wall (for extra saftety, use supplied bands to hold the skids into the clips)
.
RKS497
Receiver wrap, RRP £6.05
RKS681
Stretchable velcro, RRP £3.50
Cord holders (x10), RRP £3.40
RKS836
K&S Tracking tape, RRP £2.45
RKS2230
Holographic blade stickers RRP £4.65
Charging connector cap, RRP £2.85
RKS1821
Safety bag for LiPo batteries, RRP £21.55
Aluminium Carbon Kevlar, 27 x 19cm
RKS1391
Kneeling pad, RRP £16.95