R0338
Main rotor hub set, RRP £34.95
Main rotor grip set, RRP £35.95
Flybar seesaw, stopper & button, RRP £7.95
R0005
Flybar Control rod (heavy plastic), RRP £1.95
R0005A
Flybar Control rod (metal), RRP £6.75
Washout base, RRP £8.15
R0011
Washout ball link sets, RRP £2.45
Mixing lever/washout assembly, RRP £24.95
R0097
Elevator lever set, RRP £29.95
R0014
Elevator
lever (plastic) RRP £1.95
Aileron L-lever set, RRP £11.95
R0015
Aileron L-lever (plastic) RRP £4.95
R0013
Elevator linkage (heavy plastic), RRP £2.95
R0013A
Elevator Linkage (metal), RRP £7.45
Swash plate, RRP £27.95
All function Swash plate, RRP £30.95
With outer ring for extra strength.
R0095
Stabilizer control arm set, RRP £29.95
R0007
Feathering Spindle, RRP £2.95 for
Raptor v.1
R0355
Feathering Spindle, RRP £2.95 for
Raptor v.2
Flybar, RRP £3.45
R0002 60cm wooden blades, RRP £18.95
With white covering
R0130 Stabilizer
control arm shaft, RRP £3.95
R0053 Rotor
bolt, RRP £1.25
R0036 Paddles RRP £3.45
for 30 or 50 size helicopter
R0009 Mixing lever/washout assembly
R0339 Main rotor grip set
R0095 Stabilizer control arm set
R0038 Main rotor hub set
R0004 Flybar seesaw, stopper & button
R0005 Flybar control rod (plastic)
R0053 Rotor bolt
R0040 x 2 Double link set (plastic)
R0355 Feathering spindle
R0029 Main shaft
R0008 Flybar (single)
This
would normally cost you £148.47,
a
saving of 15%!
for Raptor 50
Comprises: 4mm flybar, paddles, stabiliser control arm set, seesaw stopper and button, plastic control rod.
R1003
Tail case set, metal and carbon, RRP £28.95
R0027
Tail case, plastic RRP £3.95
Metal tail grip set with bearing, RRP £20.95
Suitable for 30, 50 and 60 size. v2 only
R1000T
Metal tail grip set w. thrust bearings, RRP £26.95
R0151 Tail
rotor hub, RRP £2.45
R0151S
Stainless tail rotor hub, RRP £3.65
Suitable for 30, 50 and 60 size. v2 only.
.
R0112A Metal
tail pitch slider, silver colour, RRP £6.95
R0112 Metal tail pitch slider, red or blue, RRP £6.95
R1002 Metal tail pitch slider with bearing, RRP £13.45
R0017
Plastic tail pitch slider, RRP1.95
R0017L
Tail pitch links (plastic), RRP £1.25
R0117
Plastic tail pitch slider with bearing, RRP £4.45
R1001 Horizontal fin clamp, RRP £8.95
R1021 Aluminium support bridge, RRP £13.95
30 Size booms,
RRP £4.96
R0060 Black
R0060B Blue
R0060R Red
R0060G Gold
50 Size
booms, RRP £6.45
R0108 Black
R0108B Blue
R0108R Red
R0108G Gold
R1013 Carbon 50 size boom, RRP £16.95
Titan
50 booms, RRP £6.45
R0521 Titanium grey
R0521B Blue
R0521R Red
R0521G Gold
R0521P Purple
R0042 Tail boom support, 30 size, RRP £3.45
R0329 Tail boom support, 50 size, RRP £4.95
R0030 Tail
rotor shaft, RRP £2.25
R0038
Plastic tail fin set, RRP £3.95
R0279 Tail rod guide v2, RRP £1.65
R0037 Tail blades, off-white plastic, RRP £1.95
R0392 Rear tail control rod, RRP £2.95
for 30 or 50 size helicopter
R1003 Tail
case
R1000 Tail grip set
R1002 Pitch slider with bearing
R0030 Tail rotor shaft
Plastic tail blades
Price
bought separately £68.95
SAVE
10%
R0023
Clutch bell for Raptor v1, RRP £6.95
With liner.
R0358
Clutch bell for Raptor v2, RRP £7.95
With liner.
Heavy duty clutch bell for Raptor v2, RRP £8.95
With liner.
R0024
Heavy duty clutch for Raptor v1, RRP £8.95
R0359
Clutch for Raptor v2, RRP £6.95
R0359R
Heavy Duty Clutch for Raptor v2, RRP £8.95
All
come with bearing. All suitable for 30 or 50 size.
R0090
Clutch liner, 2 sets. RRP £1.75 Raptor
v1.
R0368
Clutch liner, 2 sets, RRP £1.95
Raptor v2.
R0019R
Heavy duty autorotate clutch RRP £13.95
R0020
Autorotate clutch shaft set RRP £3.45
R1019
NEW Ultimate
precision Auto-unit RRP £41.95
Main Shaft, RRP £3.95
R0018
Main Shaft Stopper, RRP £1.95
.
Pitch control arm/servo tray, RRP £29.95
H/P Muffler 30, RRP £19.95
R0109
H/P Muffler 50, RRP £24.95
Turbo type cooling fan 30 & 50, RRP £21.95
R1012
Turbo type cooling fan 50, RRP £22.95
Engine mount set 30, RRP £10.95
R1015
Engine mount set 50, RRP £11.95
R0349
Metal push/pull lever set, RRP £12.95
Suitable for 30, 50 and 60 size.
R0367
Pinion gear 9T for 30 size, RRP £2.95
R0380 Pinion gear 10T for 50 size,
RRP £2.95
R0089
Tail drive belt 30 RRP £10.95
R0174 Tail drive belt 50 RRP £12.45
R0520 Tail drive belt Titan RRP
£12.95
R0021 Guide pulley assembly RRP £2.45
R0031
Main spur gear set 30 RRP £4.95
R0148 Main spur gear set 50 RRP £4.95
R0032 Tail drive pulley set RRP £2.95
R0044 Full set of linkage rods RRP £1.95
R0050 Tail pulley set RRP £2.45
R0051
Lever bearing (4) d4 x D7 x W2.5, RRP £2.45
R0052
Tail slider bearing (2) d6 x D10 x W3, RRP £2.45
R0059
Tail shaft bearing (2) d5 x D11, RRP £2.45
R0093
Main shaft bearing set 2 x d10 x D19 x W5,
.........................................1
x d8 x D16 x W5, RRP £4.45
R0203
Starter shaft bearing d6 x D15 x W5 RRP £1.95
R0091
Bearing upgrade kit, RRP £11.45
R0026
Starter coupling v1 RRP £2.45
R0361 Starter coupling v2 RRP £2.95
R0360 Starter shaft RRP £2.45
R1005
Carbon push rod kit 30 RRP £6.45
R1006 Carbon push rod kit 50 RRP £6.95
These
push rod kits contain the rod and all end caps, fixings etc., but NOT
a servo tray - see R0321 and R0321A for these.
R1032
Fibreglass body, RRP £24.95
R1041
Fibreglass body, 3D style, RRP £24.95
Servo frame, RRP £8.45
Carbon frame base stiffener, RRP £12.45
Rear mounted servo tray, carbon, RRP £9.95
R0321A
Rear mounted servo tray, red or blue alloy, RRP £7.95
R0104 Aluminium
main frame post set
(12pcs w. screws), RRP £8.95
R0057R Frame post set, plastic RRP £2.95
R0363
Fuel tank set, RRP £4.45
R1008S Header tank with support, RRP £8.95
R1008 Aluminium header tank support, RRP
£4.45
R0040 Double link set, plastic, RRP £1.45
R0054 Servo
mounting plates (x10), RRP £3.45
Suitable for 30, 50 or 60 size.
R0061 Body
retaining set, v1, RRP £1.95
R0375 Body retaining set v2, RRP £1.95
R0062 Body mount rubbers, RRP £1.45
Crash kits, comprising wooden blades, main shaft, flybar, spindle, tail boom and support, tail blades, elevator links, and clutch liner.
R3806
Raptor 30, RRP £26.95
R3819 Raptor 50, RRP £34.95
A saving of 22% on price of individual items!
Flybar seesaw, without stopper, RRP £8.95
60 size only
.
Heavy duty Clutch, RRP £8.95
60 size only
.
H/P Muffler 60, RRP £27.95
R8001
H/P Muffler 90, RRP £29.95
.
Turbo Metal cooling fan, RRP £24.95
Suitable for 60 or 90 size
.
Metal tail grip set w. bearing, RRP £22.95
Suitable for 30, 50 or 60 size. Raptor Version 2 only.
.
R0151
Tail rotor hub, RRP £2.45
R0151S
Stainless tail rotor hub, RRP £3.65
Both suitable for 30, 50 or 60 size. Raptor Version 2 only.
.
Metal push/pull lever set, RRP £12.95
Suitable for 30, 50 or 60 size.
.
R0126
Spindle, RRP £3.45 60 size.
R0146 Flybar rod, RRP £2.45 60
size.
R0177 Rotor bolt, RRP £1.25 Suitable
for 60 or 90.
R0011 Washout ball link sets, RRP £2.45
Suitable for 30, 50 or 60.
R0185 Main shaft, RRP £3.95 60
size.
R0381 70 Durometer flap damper, RRP £1.45
60 size.
R0204 Clutch liner, 2 sets, RRP £1.95
60 size.
R0361 Starter coupling. RRP £2.95 30,
50 or 60 size, v2 only.
R0199
60 size tail boom, black, RRP £6.45
R0167 Tail boom support, RRP £5.95
60 size.
R0194 Tail drive shaft, RRP £10.95
60 size.
R1007
Carbon push rod kit, RRP £7.45
60 size. Push rod kits contain the rod and all end caps,
fixings etc., but NOT a servo tray - see R0321 and R0321A for these.
R0054 Servo mounting plates, (x10), RRP £3.45
Suitable for 30, 50 or 60
.
'Unbreakable' skid sets, RRP £8.95
R0143 red
R0144 blue
R0145 black
R0147 gold
R0142C 'off
white'
R0149 silver
All-metal skid sets, RRP £8.95
R4014B Blue
R4014BK Black
R4014R Red
.
R3836
Carbon Fibre training undercarriage, RRP £10.95
Heavy, for better stability
.
R3021 'Easy Fueler' valve set, RRP £3.95
R3001 Filter, small metal (2) RRP £1.05
R3115 Seethrough filter, RRP £3.45
RA002 Filter with holder, RRP £2.95
R3007 T-Type filter, metal RRP £2.15
R3145 Mini-pump primer valve RRP £2.95
.
RA080
Glowplug, RRP £1.95 Equivalent to OS8, no.3
RA081 Glowplug, RRP £2.15 Equivalent
to OS7, no.4
R0001
55cm wooden blades, RRP £14.95
R0002 60cm wooden blades, RRP £18.95
With white
covering. Root 12mm thick.
R0010
55cm fibreglass blades, RRP 27.45
R0012 60cm fibreglass blades, RRP £29.95
R3020 Universal Extension lead RRP £2.45
R0041
Universal links (20) RRP £3.45
R0058
Joint ball set (12) RRP £4.45
R3137
Kinkless fuel pickup tube, RRP 2.45
R3146
Tank clunk weights (2), RRP £1.45
R0120
Exhaust deflector with plug, RRP £3.45
R3106
Neck Strap, RRP £5.25
R3141
Battery pack holder, RRP £4.45
R3047 Blade
caddy, mini helis RRP £1.65
R3800 Blade
caddy, 30 - 50 size RRP £1.95
R3808
Blade caddy, 60 - 90 size RRP £1.95
For tail blades, fuel
tanks and many other parts, see our K&S
page.