Revision 4
The SL range of gyros is now on Revision 4. If you wish to have your gyro upgraded, the cost is £12 including postage. Send your gyro to PO Box 101, Glossop, SK13 5ZW, with a cheque or credit card details. If you are outside the UK, or need further details, please contact us at tech@csm-ltd.co.uk . You will also receive new PC interface software - please note that this software only works with Revision 4 gyros.
If you have lost your PC software or would like to download it rather than using a disk, click here. This is for Revision 4 gyros only (please see below for older versions)
Technical Support
560 GYRO SETUP FOR HENSELEIT 3DNT
DOWNLOADS:
Revision 3.2 GYRO PC software Self extracting .zip file. Extract to C:/SL560 at the prompt.
This download should solve any XP related issues that some XP users have reported. This PC software is suitable for users who have any version of the gyro except the latest (4 or 4e).
With their pioneering Heading Lock, Yaw Rate Demand and Gyro Flight Mode concepts CSM revolutionised the tail rotor gyro. The SL560 range uses all new sensor and processor technology to extend gyro performance still further.
SL560 key features:-
· Smart Lock - Enhanced Heading Lock mode that gives even better lock
& stop.
· Gyro Flight Modes (as pioneered by CSM)
· Selectable Digital/Super Servo support - gives optimum update rate for Super
& Digital servos.
· Quick-setup - makes it simple to set gyro sense, servo type & servo
travel from your transmitter.
· NEW! Quick-trim - accurately corrects linkage set-up.
· Built-in Exponential - gives a smooth, progressive stick response.
· Yaw Rate Demand - with rudder rates & throws it gives you total control
of stick sensitivity.
· Command conditioning - removes stick bounce & improves performance with
PPM (FM) receivers.
· Acceleration Gain - gives automatic, dynamically adjusting gain tracking.
· Dual Independent Stop Tracking - gives separate optimisation of left and
right stop quality.
· High Resolution pulse measurement and generation systems.
· PC interface - allows access to over 20 internal gyro parameters for performance
customization.
· Two stage power supply regulation.
· Outstanding customer support & repair service.
MICRO version just 24mm x 24mm x 20mm, weight 12 grams